Offer a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only.
Note: To be used for cable stringing or pulling only.
Unit of Measure
Specifications
Work Load Limit (lb.) |
N/A 1760 |
Work Load Limit (N) |
N/A 7828 |
Stock Diameter S (in.) |
N/A 0.375 |
Stock Diameter S (mm) |
N/A 9.5 |
Threaded Shaft T (in.) |
N/A 0.47 |
Threaded Shaft T (mm) |
N/A 12 |
Dimension A (in.) |
N/A 0.750 |
Dimension A (mm) |
N/A 19.1 |
Dimension B (in.) |
N/A 3.750 |
Dimension B (mm) |
N/A 95.3 |
Dimension C (in.) |
N/A 3.000 |
Dimension C (mm) |
N/A 76 |
Size (in.) |
N/A 3/8 |
Size (mm) |
N/A 10 |
Pulling Eye Cable Size Range |
N/A All |
Fixed Head Pulling Eye I.D. |
N/A 1.06 to 2.18 in. (27 to 55 mm) |
Eye to Eye Connectors Size |
N/A All |
Pulling Harnesses-Separate Leg Ends |
N/A All Cable |
Pulling Harnesses-Large Front Link |
N/A 1/8, 1/4, 3 & 4 x 3/8, 2 x 1/2 Chain |
