The Deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.
Request Information
Unit of Measure
Items
53434

1 in. Tip Size and 18 in. Overall Length Ship Auger Bit
53434

7/8 in. Tip Size and 18 in. Overall Length Ship Auger Bit
Description N/A The Deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.
Brand N/A Klein®
Type N/A Ship Auger Drill Bit
UPC Code N/A 92644534416 N/A 92644534393
UNSPSC code N/A 27111537
Style N/A Screw Point
Material N/A N/A Heat Treated Tempered Steel
Shank Type N/A Hex
Overall Length N/A 18 in457.2 mm
Shank Size N/A 7/16
Twist Length N/A 15 in381.0 mm
Tip Size N/A 25.4 mm1 in N/A 22.2 mm7/8 in
Weight N/A 0.8 kg1.80 lb N/A 0.50 kg1.10 lb
Application N/A Holemaking

"Heavy Construction and Repair Work in Mines, on Docks and Bridges, and Electrical Work"

Bits drill through nails, wood, vinyl, plastics, and heavy timber.
Features N/A
  • Bits drill through nails, wood, vinyl, plastics, and heavy timber.
  • Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring.
  • Feed-screw pilot draws bit into wood.
  • Full length is heat-treated and tempered.
  • Head and twist are ground to correct clearance for easy removal from hole.
  • Always ensure that you and persons in the vicinity wear approved eye protection.
  • Never use on or near live electrical circuits.
 		N/A
  • Bits drill through nails, wood, vinyl, plastics, and heavy timber.
  • Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring.
  • Feed-screw pilot draws bit into wood.
  • Full length is heat-treated and tempered.
  • Head and twist are ground to correct clearance for easy removal from hole.
  • Head and twist are ground to correct clearance for easy removal from hole.
  • Always ensure that you and persons in the vicinity wear approved eye protection.
  • Never use on or near live electrical circuits.