• High tensile strength HDPE duct with "Figure 8" construction incorporating a flooded galvanized support strand for easy one-step aerial placement of duct and strand.
  • Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection.
  • Fits standard serpentine clamp
  • Black duct with UV inhibitor
  • Sequential markings in feet or meters
Request Information
Unit of Measure
Items
Figure 8 - Aerial Ducts Carlon

1-1/4" Figure 8 - Aerial Duct
Figure 8 - Aerial Ducts Carlon

2" Figure 8 - Aerial Duct
Duct Size (in.) N/A 1-1/4 N/A 2
Duct Size (mm) N/A 32 N/A 51
Breaking Pull Strength (lb.)1 N/A 1/4 in. EHS galv. for 6650 3/8 in. EHS galv. for 15400 5/16 in. EHS galv. for 11200 N/A 3/8 in. EHS galv. for 15400
Type N/A SDR 13.5 for 1/4 in. Strand SIDR 9 for 1/4 in. Strand SIDR 9 for 3/8 in. Strand SIDR 9 for 5/16 in. Strand N/A Special for 3/8 in. Strand
Standard Shipping Lengths (ft.) N/A 2500 5000 N/A 2500
Typical Span Lengths (ft.) N/A 1/4 in. EHS galv. for 225 3/8 in. EHS galv. for 500 5/16 in. EHS galv. for 400 N/A 3/8 in. EHS galv. for 500
Typical Span Lengths (m) N/A 1/4 in. EHS galv. for 67 3/8 in. EHS galv. for 153 5/16 in. EHS galv. for 122 N/A 3/8 in. EHS galv. for 153
Applications N/A Aerial; highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass.
  • 1 Point at which strand failure may occur.