Request Information
  • High tensile strength HDPE duct with "Figure 8" construction incorporating a flooded galvanized support strand for easy one-step aerial placement of duct and strand.
  • Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection.
  • Fits standard serpentine clamp
  • Black duct with UV inhibitor
  • Sequential markings in feet or meters
Unit of Measure

Specifications

Duct Size (in.)

 N/A 1-1/4

Duct Size (mm)

 N/A 32
Breaking Pull Strength (lb.)1 N/A 1/4 in. EHS galv. for 6650 3/8 in. EHS galv. for 15400 5/16 in. EHS galv. for 11200

Type

 N/A SDR 13.5 for 1/4 in. Strand SIDR 9 for 1/4 in. Strand SIDR 9 for 3/8 in. Strand SIDR 9 for 5/16 in. Strand

Standard Shipping Lengths (ft.)

 N/A 2500 5000

Typical Span Lengths (ft.)

 N/A 1/4 in. EHS galv. for 225 3/8 in. EHS galv. for 500 5/16 in. EHS galv. for 400

Typical Span Lengths (m)

 N/A 1/4 in. EHS galv. for 67 3/8 in. EHS galv. for 153 5/16 in. EHS galv. for 122

Applications

Applications

 N/A Aerial; highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass.
  • 1 Point at which strand failure may occur.