Request Information
"Use this Non-Contact Voltage Tester to detect standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires. A bright green LED will tell you the tester is working and also functions as a worklight. It changes to red and warning tones sound when voltage is detected."
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A Non-Contact Voltage Tester

UPC Code

 N/A 92644690006

UNSPSC code

 N/A 41113637

Weight with Batteries

 N/A 45 g1.6 oz

Batteries

 N/A Two Alkaline 1.5V AAA (Batteries Included)

Number of Batteries

 N/A 2

Frequency [Min]

 N/A 50 Hz

Frequency [Max]

 N/A 500 Hz

Alternat Current (AC) Voltage

 N/A 50 to 1000 V

Drop Protection

 N/A 9.8 ft3 m

Standard

 N/A CAT IV 1000V

Weight

 N/A 22.7 g0.80 oz

Note

 N/A Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.

Dimensions

Overall Length

 N/A 5-1/2 in139.7 mm

Overall Width

 N/A 23/32 in18.3 mm

Overall Height

 N/A 1 in25.4 mm

Features

Features

 N/A
  • "Non-contact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires."
  • "High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace."
  • "When voltage is detected, a high intensity, bright red LED illuminates and a warning tone sounds."
  • Discrete digitally controlled ON/OFF power button.
  • Auto power-off feature conserves and extends battery life.
  • Microprocessor controlled low-battery indicator and tester shutdown.
  • CAT IV 1000 Volt safety rating provides expanded operation and protection.
  • 50 to 1000 Volt AC power operating range allows broad application.
  • Durable polycarbonate plastic resin construction.
  • Lightweight compact design with a convenient clip to fit securely in your pocket.
  • Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.
  • Green Led Turns Off and Red Led Illuminates Continuously.