• Cable Lashers

    The Condux Lasher is designed for bare strand and over-lashing applications and can facilitate single lashing and double lashing. Because the lasher is wire driven, actual lashing remains consistent in spacing and tension throughout the span. Lasher slippage is no longer a problem. The Condux Lasher is equipped with a contoured protective cover to prevent damage from tree branches and other obstacles. The lasher is weather resistant, with all components either plated, coated or made frommore

  • Lashing Wires

    Durable stainless steel Lashing Wire for use with the Condux Cable Lasher.

  • J2 Cable Lashers / J2 Lasher Guards (Halo)

    The J2 Cable Lasher is used to lash an aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.

    The J2 Lasher's design gives it maximum service life. The body is cylindrical to help it slip more easily through branches and obstructions. There is a built-in mechanical brake to prevent unintended reversal, an automatic drum lock for easy span transfers, an all range tensioning device for optimum strand traction, and highmore

  • J2 Cable Lashers / J2 Lasher Guards (Halo)

    This item keeps your lasher free of tree limbs, drop wires and nuisances which would otherwise obstruct your operation.

    Circular aluminum tube with hinged gate that opens to let cable and strand pass through, then closes to provide 360º protection. Two mounting bolts are included for mounting the halo onto your lasher.

  • G Cable Lashers with Chest

    The largest of all GMP lashers, this unit is designed to lash large single or combination aerial cable up to 5 in. in diameter to a supporting strand. Can be used for new installs or with existing cables in place

    • Lashes any cable from about 2.5 in. to 5 in. (60-125 mm) diameter, on strand from 11/32 to 3/4 in. (9-19 mm) diameters with one or two left lay spiral wrappings of 0.065 in. diameter stainless steel wire.
    • Nominal spacing between wraps is 16-1/2 in. (42 cm).
    • Each lasher includes a 6
    • more
  • C Cable Lashers with Chest

    The C Cable Lasher is used to lash small diameter aerial cables to supporting strand with stainless steel lashing wire. It is used primarily for new installations.

    • Will lash any single or multiple cables up to 1-5/8 in. (40 mm) in diameter onto bare 1/4 in. to 3/8 in. strand.
    • All the same high quality features as the 12 Cable Lasher, including dual magazines allowing you to load two 1200 ft. coils of 0.045 in. lashing wire, (365 m of 1.1 mm wire), the ability to mount a lasher guard or "
    • more