Request Information
"Lightweight, compact grips pull an exceptionally wide range of cable sizes and types. Designed with a round inside-jaw contour for maximum contact to minimize conductor damage. Lower jaw is serrated to firmly grip insulated cables and conductors. Design includes a latch that prevents the grip from falling in case of jaw disengagement from the cable."
Unit of Measure

Specifications

Type

 N/A Parallel Jaw Grip

UPC Code

 N/A 92644471759

UNSPSC code

 N/A 27111712

Safe Load [Max]

 N/A 2041 kg4500 lb

Spring

 N/A Y

Weight

 N/A 1.2 kg2.6 lb

Dimensions

Jaw Length

 N/A 2-1/2 in63.5 mm

Cable Diameter

 N/A 0.157 to 0.875 in3.98 to 22.22 mm

Features

Features

 N/A
  • "Lightweight, compact grips pull an exceptionally wide range of cable sizes and types."
  • Designed with a round inside-jaw contour for maximum contact to minimize conductor damage.
  • Lower jaw is serrated to firmly grip insulated cables and conductors.
  • Design includes a latch that prevents the grip from falling in case of jaw disengagement from the cable.
  • "Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks."
  • "Before each use, clean jaw area and inspect grip for proper operation to avoid slippage."
  • "When used on/near energized lines, ground, insulate, or isolate grip before pulling."
  • Do not exceed rated capacity.
  • "Grips are to be used for temporary installation, not for permanent anchorage."
  • Spring