Request Information
"Klein® Tools' VDV Commander Test-n-Map is a full-featured voice/data/video cable tester. It locates, tests and measures coax, data and telephone cables to ensure fast and accurate installations. In addition, the Commander detects Power over Ethernet (PoE) and can store and output test results for easy report management."
Unit of Measure

Specifications

Brand

 N/A VDV Commander, Klein®

Type

 N/A Tester

UPC Code

 N/A 92644582127

UNSPSC code

 N/A 41113740

Display Type

 N/A Color

Test & Measure Types

 N/A Cable Length Measurement to 1500 ft (457 m), Miswire Fault Detection, Open Fault Detection, Power Over Ethernet Detection, Shield Detection, Short Fault Detection, Split-Pair Fault Detection

Maximum Cable Length

 N/A Up to 1500 ftUp to 457 m

Cable Type

 N/A Coaxial, Data (RJ45) and Telephone (RJ11) Cables

Included

 N/A Probeplus Tone Tracing Probe, Carrying Case, Remotes and Test Cables, Telephone Cables with Adapter

Batteries

 N/A Commander: 6 AA Alkaline, Probe: 1 9 V Alkaline

Commander Active Battery Life

 N/A 20 h

Commander Standby Battery Life

 N/A 10 y

Probe Active Battery Life

 N/A 25 h

Probe Standby Battery Life

 N/A 4 y

Open Fault

 N/A Yes

Accuracy

 N/A ±(5% and 1 ft/0.3 m)

Supported Remotes

 N/A (20) F-Connector CoaxMap ID/RJ45 LanMap ID

Location ID

 N/A 20

Display Size

 N/A 2.7 in68.58 mm

Multiple Style Tone Generator

 N/A 4

Number of Batteries

 N/A 7

Weight

 N/A 340 g12 oz

Dimensions

Overall Height

 N/A 6-51/64 in172.6 mm

Overall Length

 N/A 4-3/8 in111.1 mm

Application

Application

 N/A Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables

Features

Features

 N/A
  • "Identify wiring faults including miswire, open, short, split-pair, reverse-pair and verify shielding."
  • "Detect, identify and test Power over Ethernet (PoE)."
  • Measure cable length and distance to a fault with Time Domain Reflectometry (TDR) technology.
  • "Measure paired-conductor cables up to 1,500 ft. (457 m) with accuracy of up to ± (5% and 1 ft./0.3 m)."
  • Single-end cable testing or complete two-end cable testing with Test-n-Map ID Remotes.
  • Perform active network (Ethernet) testing -- detect capabilities and connection speeds.
  • "Locate and identify cables with location ID remotes, Test-n-Map ID remotes, Link Light and Tone Generator."
  • Test and identify location in one step (two-end testing) with Test-n-Map ID remotes (RJ45 and RJ12 ports) - supports up to 8 remotes.
  • "Multiple style (4 cadences) tone generator capable of sending a tone on a single conductor, a conductor pair or over all conductors. Kit includes required PROBEplus Tone Tracing Probe (VDV500-060)."
  • Always wear approved eye protection.
  • Do NOT use on energized circuits.
  • "Accuracy/Measurement Resolution, Active Ethernet Detects Link Speed and Capabilities to 1 Gbps; Customizable Setup; Imperial or Metric Results, Multiple Languages: English/Spanish/French; Single-End Cable Testing"

Note

Note

 N/A Read, understand and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.