Request Information
"Klein® Tools Electrician's Insulated Combination Pliers are 1000V rated and VDE certified for safety on the job. The multi-color, sleek design with small thumb guards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools."
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A Insulated Side-Cutting Plier

UPC Code

 N/A 92644701917

UNSPSC code

 N/A 27112135

Style

 N/A High-Leverage Plier

Material

 N/A Induction Hardened Steel

Handle Color

 N/A Orange/Gray

Cut Style

 N/A Side-Cutting

Handle Finish

 N/A 3-Layer

Nose Type

 N/A Universal

Insulated

 N/A Yes

Joint Type

 N/A Hot Riveted

Rated Voltage

 N/A 1000 V

Industry Standards/Certifications

 N/A IEC 60900, ASTM F1505, VDE certified

Weight

 N/A 0.50 kg1.10 lb

Dimensions

Jaw Width

 N/A 1-1/32 in26.2 mm

Overall Length

 N/A 8-7/8 in225.4 mm

Jaw Thickness

 N/A 1-25/32 in45.2 mm

Jaw Length

 N/A 1-25/32 in45.2 mm

Knife Length

 N/A 3/4 in19.1 mm

Application

Application

 N/A Cuts ACSR, Screws, Nails, and Most Hardened Wire

Features

Features

 N/A
  • "Crimping die behind hinge for superior leverage when crimping non-insulated connectors, lugs and terminals"
  • Toothed pipe-grip for greater power.
  • "Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein® insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • "Unique three-part insulation with white underlayer provides a warning sign that insulation may be compromised
  • "Multi-color, sleek design with small thumb guards for ease of handling and easy storage in your tool belt"
  • Always inspect your tools before use.
  • "Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source."
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • "Keep tool clean, dry and free of any surface contaminants."
  • Destroy tool if the insulation is damaged in any way.