Request Information
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A High-Leverage Insulated Diagonal Cutting Plier

UPC Code

 N/A 92644720932

UNSPSC code

 N/A 27112135

Finish

 N/A Black Oxide Finish

Handle Color

 N/A Orange

Cut Style

 N/A Diagonal-Cutting

Handle Finish

 N/A 2-Layer

Insulated

 N/A Yes

Cutting Knives

 N/A Standard

Joint Type

 N/A Hot Riveted

Nose Type

 N/A Tapered

Material

 N/A Induction Hardened Steel

Standard

 N/A International Electrotechnical Commission (IEC) 60900 and American Society for Testing and Materials (ASTM) F1505

Weight

 N/A 0.32 kg0.71 lb

Dimensions

Jaw Width

 N/A 1-3/16 in30.2 mm

Overall Length

 N/A 8-1/4 in209.6 mm

Jaw Thickness

 N/A 13/16 in20.6 mm

Jaw Length

 N/A 13/16 in20.6 mm

Handle Length

 N/A 6-3/4 in171.5 mm

Application

Application

 N/A Cuts ACSR, Screws, Nails, and Most Hardened Wire

Features

Features

 N/A
  • "Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol."
  • Two layers of insulation provide protection against electric shock.
  • "Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool."
  • "A flame retardant, impact-resistant, bright orange outer coating."
  • High-leverage design. Rivet is closer to the edge for 36 % greater cutting power than other plier designs.
  • Features combination polished and block-oxide finish.
  • "Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source."
  • "Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein® insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source."
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
  • "Because moisture, films, or other surface contaminants are conductive, Klein® insulated tools must be kept clean, dry, and free of any surface contaminants."
  • Flame Retardant and Impact Resistant Handle