The Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and swivels. A swivel head prevents twisting and binding of the innerductas it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple innerducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3/8" deep socket or adjustable wrench.

NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.
Unit of Measure

Specifications

Nom. Size (in.)

N/A 2

Nom. Size (mm)

N/A 51

Innerduct I.D. Range A to B (in.)

N/A 1.93 to 2.12

Innerduct I.D. Range A to B (mm)

N/A 49 to 54

Max. O.D. C (in.)

N/A 2.44

Max. O.D. C (mm)

N/A 62

Hole Diameter D (in.)

N/A 0.44

Hole Diameter D (mm)

N/A 11

Slot Width E (in.)

N/A 0.56

Slot Width E (mm)

N/A 14

Slot Depth F (in.)

N/A 1.31

Slot Depth F (mm)

N/A 33

Pin Diameter G (in.)

N/A 0.44

Pin Diameter G (mm)

N/A 11

Pin Center H (in.)

N/A 0.56

Pin Center H (mm)

N/A 14

Note

N/A Will fit all Condux multiple pulling harnesses.