Request Information
Unit of Measure
Items
EE-101-Rigging-Swivel-Lewis_1000

8-1/8 in. Length EE-101 Ball Bearing Swivel
W-1-Tension-Stringing-Ball-Bearing-Swivel

5-3/8 in. Length W Series Ball Bearing Swivel
W-1-Tension-Stringing-Ball-Bearing-Swivel

6-1/2 in. Length W Series Ball Bearing Swivel
W-1-Tension-Stringing-Ball-Bearing-Swivel

7-5/8 in. Length W Series Ball Bearing Swivel
W-1-Tension-Stringing-Ball-Bearing-Swivel

8-3/4 in. Length W Series Ball Bearing Swivel
Description N/A Rigging Swivel

Eye-Eye Sealed Ball Bearing Swivel - 4,000 lbs. WL

EE-101 Sealed Ball Bearing Swivel is specifically designed for rigging applications.

This Sealed, Eye-Eye ball bearing swivel with a running load of 4,000 lbs. is specifically designed for rigging applications. 		N/A Greasable & Sealed Non-Greasable

The W (Regular Duty) Series Swivels are specifically designed for tension stringing to assure the conductor will remain in the neutral position during stringing of transmission and distribution lines. These swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust & shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable. 		N/A Greasable & Sealed Non-Greasable

The W (Regular Duty) Series Swivels are specifically designed for tension stringing to assure the conductor will remain in the neutral position during stringing of transmission and distribution lines. These swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust & shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable. 		N/A Greasable & Sealed Non-Greasable

The W (Regular Duty) Series Swivels are specifically designed for tension stringing to assure the conductor will remain in the neutral position during stringing of transmission and distribution lines. These swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust & shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable. 		N/A Greasable & Sealed Non-Greasable

The W (Regular Duty) Series Swivels are specifically designed for tension stringing to assure the conductor will remain in the neutral position during stringing of transmission and distribution lines. These swivels are manufactured from high-grade pre-stressed steel. Proper placement of thrust and radial bearing allow thrust & shock loads to be absorbed without affecting rotation of swivel. Pins are screwdriver removable.
Brand N/A Lewis
Type N/A Bearing Swivel N/A Standard & Directional Boring W Regular Duty Swivels N/A Standard & Directional Boring W Regular Duty Swivels N/A Standard & Directional Boring W Regular Duty Swivels N/A Standard & Directional Boring W Regular Duty Swivels
Work Load (WL) N/A 4000 lb N/A 5000 lb N/A 5,400 lb N/A 12,000 lb N/A 15,000 lb
Ultimate Tensile Strength (UTS) N/A 10000 lb N/A 15,000 lb N/A 16,200 lb N/A 36,000 lb N/A 45,000 lb
Length A N/A 8-1/8 in N/A 5-3/8 in N/A 6-1/2 in N/A 7-5/8 in N/A 8-3/4 in
Pin Dia. B N/A N/A 7/16 in N/A 1/2 in N/A 5/8 in N/A 3/4 in
Jaw C N/A N/A 5/8 in N/A 7/8 in N/A 1 in N/A 1-1/4 in
Dia. D N/A N/A 1-5/16 in N/A 1.625 in N/A 2 in N/A 2-1/4 in
Material N/A N/A Steel N/A Steel N/A Steel N/A Steel
Performance N/A N/A Regular Duty N/A Regular Duty N/A Regular Duty N/A Regular Duty
Patent No. N/A N/A 5,484,220 N/A 5,484,220 N/A 5,484,220 N/A 5,484,220
Large Outer Diameter (B) N/A 2-9/16 in N/A N/A N/A N/A
Large Inner Diameter (C) N/A 1-1/2 in N/A N/A N/A N/A
Small Outer Diameter (D) N/A 2-5/16 in N/A N/A N/A N/A
Small Inner Diameter (E) N/A 1-1/4 in N/A N/A N/A N/A
Body Diameter (F) N/A 2 in N/A N/A N/A N/A
Features N/A Sealed Ball Bearing Swivel for Rigging N/A N/A N/A N/A
Warning N/A Read The Following Before Using Lewis Ball Bearing Swivels
  • It is essential to inspect all Lewis swivels before and after each use. If the swivel is loose and/or the bearings feel rough when rotated or are seized and cannot be rotated, the swivel should be removed from service immediately.
  • Always select a swivel larger than the machine capacity. If a Lewis swivel is exposed to a load exceeding the posted work load it should be removed from service immediately, and a larger swivel should thereafter be used.
  • It is important that you read and understand all breaking strength, safety & technical data relating to all Lewis Manufacturing Company products. Please order carefully. Do not exceed published working load on any Lewis swivel.
  • Lubricate all greasable swivels before and after each use.
Note N/A N/A Lewis swivels can be ordered with screwdriver removable pins or allen wrench removable pins. Standard is screwdriver slotted pins. Lewis Swivels of size 5 and larger are built with Timken and Roller alignment bearings for superior side load capacity, and roller thrust for maximum pulling load & long life. Size 4 and smaller swivels use roller and roller type thrust bearings with ball or non-ball bearing alignment bearings. N/A Lewis swivels can be ordered with screwdriver removable pins or allen wrench removable pins. Standard is screwdriver slotted pins. Lewis Swivels of size 5 and larger are built with Timken and Roller alignment bearings for superior side load capacity, and roller thrust for maximum pulling load & long life. Size 4 and smaller swivels use roller and roller type thrust bearings with ball or non-ball bearing alignment bearings. N/A Lewis swivels can be ordered with screwdriver removable pins or allen wrench removable pins. Standard is screwdriver slotted pins. Lewis Swivels of size 5 and larger are built with Timken and Roller alignment bearings for superior side load capacity, and roller thrust for maximum pulling load & long life. Size 4 and smaller swivels use roller and roller type thrust bearings with ball or non-ball bearing alignment bearings. N/A Lewis swivels can be ordered with screwdriver removable pins or allen wrench removable pins. Standard is screwdriver slotted pins. Lewis Swivels of size 5 and larger are built with Timken and Roller alignment bearings for superior side load capacity, and roller thrust for maximum pulling load & long life. Size 4 and smaller swivels use roller and roller type thrust bearings with ball or non-ball bearing alignment bearings.