The CHAMPION MIX® system is a two part adhesive, epoxy resin system, designed to permanently bond fittings and joints of fiberglass reinforced epoxy conduit. It is also designed for use with pultruded polyester and vinyl ester components. Each cartridge system contains resin, hardener, and one plastic static mixer. An adhesive gun is required for applying the adhesive (ordered separately).

Under normal conditions, it takes approximately 45 minutes for the CM-2040 and CM-2070 adhesives to harden at their rated temperatures. If a faster setting adhesive is desired, there are CHAMPION MIX® adhesives available that gel much faster.
Request Information
Unit of Measure
Items
CHAMPION MIX® Epoxy Adhesives

CHAMPION MIX® 21 and up ºC Temperature Range and 30 to 45 minutes Approximate Curing Time Epoxy Adhesive
CHAMPION MIX® Epoxy Adhesives

CHAMPION MIX® 4 to 21 ºC Temperature Range and 30 to 45 minutes Approximate Curing Time Epoxy Adhesive
CHAMPION MIX® Epoxy Adhesives

CHAMPION MIX® 21 and up ºC Temperature Range and 20 to 30 minutes Approximate Curing Time Epoxy Adhesive
Description N/A The CHAMPION MIX® system is a two part adhesive, epoxy resin system, designed to permanently bond fittings and joints of fiberglass reinforced epoxy conduit. It is also designed for use with pultruded polyester and vinyl ester components. Each cartridge system contains resin, hardener, and one plastic static mixer. An adhesive gun is required for applying the adhesive (ordered separately).

Under normal conditions, it takes approximately 45 minutes for the CM-2040 and CM-2070 adhesives to harden at their rated temperatures. If a faster setting adhesive is desired, there are CHAMPION MIX® adhesives available that gel much faster.
Brand N/A Champion Fiberglass®, Inc.
Type N/A Epoxy Adhesive
Temperature Range N/A 21 and up ºC70 and up ºF N/A 4 to 21 ºC40 to 70 ºF N/A 21 and up ºC70 and up ºF
Approximate Curing Time N/A 30 to 45 Minutes N/A 30 to 45 Minutes N/A 20 to 30 Minutes
Estimated Number of Joints per Container (3/4 in.) N/A 100
Estimated Number of Joints for Container (1 in.) N/A 85
Estimated Number of Joints per Container (1 1/4 in.) N/A 75
Estimated Number of Joints per Container (1 1/2 in.) N/A 60
Estimated Number of Joints per Container (2 in.) N/A 50
Estimated Number of Joints per Container (2 1/2 in.) N/A 40
Estimated Number of Joints per Container (3 in.) N/A 35
Estimated Number of Joints per Container (3 1/2 in.) N/A 30
Estimated Number of Joints per Container (4 in.) N/A 25
Estimated Number of Joints per Container (5 in.) N/A 20
Estimated Number of Joints per Container (6 in.) N/A 15
Note for Estimated Number of Joints Per Container N/A Estimated only, as it varies depending on the amount of adhesive applied per application.
Product Form N/A Gel
Application N/A Permanently bond fittings and joints of fiberglass reinforced epoxy conduit.
Use with pultruded polyester and vinyl ester components.
General Information N/A The "Fast Gel" adhesives can be specified by adding the suffixes, "FG" or "SFG" to the part numbers. Because the "Fast Gel" and "Super-Fast Gel" adhesives set up quicker, additional mixing tubes may be required.
Note N/A Proper mixing can be visually ascertained when the epoxy mixture is evenly gray.