Colonial TelTek
Colonial TelTek
201 W. Church Road
King of Prussia, PA 19406
Phone: (855) 686-7713
Email: Info@colonialteltek.com
Website: www.knobsource.com
Print Back
On thin-wall PE or PVC duct, it is recommended that a steel sleeve be used. This product will limit the expansion of the pipe as the pulling eye is installed, ensuring the best possible grip for the eye.

Note: 1-1/4," 1-1/2," 2," 2-1/4," 12" and 14" eyes come complete with sleeves.
PE & PVC Pipe Pulling Eye Sleeves
Unit of Measure
1 

Part #

Item Name

Pulling Eye Size (in.)

Pulling Eye Size (mm)

Length (in.)

Length (mm)

I.D. (in.)

08220125 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 2-1/2 N/A 64 N/A 1.88 N/A 48 N/A 2.900
08220130 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 3 N/A 76 N/A 2.25 N/A 57 N/A 3.53
08220140 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 4 N/A 102 N/A 2.56 N/A 65 N/A 4.54
08220150 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 5 N/A 127 N/A 3.19 N/A 81 N/A 5.63
08220160 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 6 N/A 152 N/A 3.69 N/A 94 N/A 6.67
08220170 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 7-1/8 N/A 178 N/A 4.00 N/A 102 N/A 7.17
08220180 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 8 N/A 203 N/A 4.31 N/A 109 N/A 8.67
08220110 N/A PE & PVC Pipe Pulling Eye Sleeves N/A 10 N/A 254 N/A 4.65 N/A 118 N/A 10.85
Unit of Measure
1