Colonial TelTek
Colonial TelTek
201 W. Church Road
King of Prussia, PA 19406
Phone: (855) 686-7713
Email: Info@colonialteltek.com
Website: www.knobsource.com
Print Back
  • High tensile strength HDPE duct with "Figure 8" construction incorporating a flooded galvanized support strand for easy one-step aerial placement of duct and strand.
  • Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection.
  • Fits standard serpentine clamp
  • Black duct with UV inhibitor
  • Sequential markings in feet or meters
Figure 8 - Aerial Ducts Carlon
Unit of Measure
1 

Part #

Item Name

Breaking Pull Strength (lb.)

Standard Shipping Lengths (ft.)

Typical Span Lengths (ft.)

Typical Span Lengths (m)

item-4442 N/A 1-1/4" Figure 8 - Aerial Duct N/A 1/4 in. EHS galv. for 6650 3/8 in. EHS galv. for 15400 5/16 in. EHS galv. for 11200 N/A 2500 5000 N/A 1/4 in. EHS galv. for 225 3/8 in. EHS galv. for 500 5/16 in. EHS galv. for 400 N/A 1/4 in. EHS galv. for 67 3/8 in. EHS galv. for 153 5/16 in. EHS galv. for 122
item-4443 N/A 2" Figure 8 - Aerial Duct N/A 3/8 in. EHS galv. for 15400 N/A 2500 N/A 3/8 in. EHS galv. for 500 N/A 3/8 in. EHS galv. for 153
Unit of Measure
1