Colonial Teltek - PE & PVC Pipe Pulling Eye Sleeves

On thin-wall PE or PVC duct, it is recommended that a steel sleeve be used. This product will limit the expansion of the pipe as the pulling eye is installed, ensuring the best possible grip for the eye.

Note: 1-1/4," 1-1/2," 2," 2-1/4," 12" and 14" eyes come complete with sleeves.

Unit of Measure

Items	08220125 PE & PVC Pipe Pulling Eye Sleeves Add to Quote	08220130 PE & PVC Pipe Pulling Eye Sleeves Add to Quote	08220140 PE & PVC Pipe Pulling Eye Sleeves Add to Quote	08220150 PE & PVC Pipe Pulling Eye Sleeves Add to Quote	08220160 PE & PVC Pipe Pulling Eye Sleeves Add to Quote
Pulling Eye Size (in.)	N/A 2-1/2	N/A 3	N/A 4	N/A 5	N/A 6
Pulling Eye Size (mm)	N/A 64	N/A 76	N/A 102	N/A 127	N/A 152
Length (in.)	N/A 1.88	N/A 2.25	N/A 2.56	N/A 3.19	N/A 3.69
Length (mm)	N/A 48	N/A 57	N/A 65	N/A 81	N/A 94
I.D. (in.)	N/A 2.900	N/A 3.53	N/A 4.54	N/A 5.63	N/A 6.67
I.D. (mm)	N/A 74	N/A 90	N/A 115	N/A 143	N/A 169
O.D. (in.)	N/A 3.13	N/A 3.75	N/A 4.75	N/A 5.88	N/A 7.00
O.D. (mm)	N/A 80	N/A 95	N/A 121	N/A 149	N/A 178