Print Back
These anchors can be installed either manually or with power driven equipment. Manual installation is accomplished by inserting a bar through the eye and screwing the anchor down. Installations with portable or vehicle mounted equipment is accomplished by means of adapters. The eye dimensions are the same as shown on the Threaded Forged-Eye Anchor Rods.
No-Wrench Screw Anchors
Unit of Measure
1 

Part #

Item Name

Description

Approx. Weight Each (lb.)

Wire Diameter (in.)

Type

ft. per Coil

Avg. Break Strength (lb.)

TJ6524WCA N/A No-Wrench Screw Anchor N/A 4" Helix, 3/4" x 54" Shaft N/A 8.1 N/A N/A N/A N/A
TJ6526WCA N/A No-Wrench Screw Anchor N/A 6" Helix, 3/4" x 66" Shaft N/A 10.9 N/A N/A N/A N/A
TJ6528WCA N/A No-Wrench Screw Anchor N/A 8" Helix, 1" x 66" Shaft N/A 19.1 N/A N/A N/A N/A
TJ6530WCA N/A No-Wrench Screw Anchor N/A 10" Helix, 1-1/4" x 8' Shaft N/A 30.3 N/A N/A N/A N/A
TJ6550WCA N/A No-Wrench Screw Anchor N/A 10" Helix, 1-1/4" x 8' Shaft N/A 41.1 N/A N/A N/A N/A
TJ6585WCA N/A No-Wrench Screw Anchor N/A 15" Helix, 1-1/4" x 8' Shaft N/A 52.0 N/A N/A N/A N/A
LW038SSX1600 N/A Lashing Wire N/A These anchors can be installed either manually or with power driven equipment. Manual installation is accomplished by inserting a bar through the eye and screwing the anchor down. Installations with portable or vehicle mounted equipment is accomplished by means of adapters. The eye dimensions are the same as shown on the Threaded Forged-Eye Anchor Rods. N/A N/A 0.038 N/A 302 S.S N/A 1600 N/A 115
LW045SSX1200 N/A Lashing Wire N/A These anchors can be installed either manually or with power driven equipment. Manual installation is accomplished by inserting a bar through the eye and screwing the anchor down. Installations with portable or vehicle mounted equipment is accomplished by means of adapters. The eye dimensions are the same as shown on the Threaded Forged-Eye Anchor Rods. N/A N/A 0.045 N/A 302 S.S N/A 1200 N/A 115
LW045SSX1200 N/A Lashing Wire N/A These anchors can be installed either manually or with power driven equipment. Manual installation is accomplished by inserting a bar through the eye and screwing the anchor down. Installations with portable or vehicle mounted equipment is accomplished by means of adapters. The eye dimensions are the same as shown on the Threaded Forged-Eye Anchor Rods. N/A N/A 0.045 N/A 430 S.S N/A 1200 N/A 125
Unit of Measure
1