Colonial TelTek
Colonial TelTek
201 W. Church Road
King of Prussia, PA 19406
Phone: (855) 686-7713
Email: Info@colonialteltek.com
Website: www.knobsource.com
Print Back
The LSG-X series performs the same as the standard LSG series. The LSG-X cannot be taken apart in the middle, it is permanently attached via our "Swivel Tube" Assembly.

This swivel tube assembly has a low profile heavy-duty friction swivel. This snake is for applications where the two pulling grip elements do not need to be separated. The swivel is permanently greased and has the size range and working load clearly stenciled on the swivel tube assembly. Make sure to BAND AND TAPE the ends of the Grips.

Rotating with Non-Removable Swivel - LOW PROFILE
Unit of Measure

Specifications

Brand

 N/A Lewis

Type

 N/A Wire Rope & Cable Snake Grip

Work Load (WL)

 N/A 5000 lb

Ultimate Tensile Strength (UTS)

 N/A 10000 lb

Style

 N/A LSG-X Snake Grip

Performance

 N/A Heavy-Duty

Dimensions

Range

 N/A 3 1/2 to 4 1/4 in

Warning

Warning

 N/A READ THIS GUIDELINE BEFORE USING LSG SNAKE GRIPS
FOLLOW GRIPS BANDING INSTRUCTIONS CONTAINED IN THIS DOCUMENT
  1. Safety is always No. 1. Make sure no one is under the line as it is being pulled through the blocks and crown.
    DO NOT stand below or near the drilling line under tension, severe injury or death could occur. KEEP BACK
  2. Both ends of the snake grip must be properly BANDED AND TAPED according to banding instructions located in this document
  3. Failure to follow the safety and use instructions properly could lead to injury or even death.