Colonial TelTek
Colonial TelTek
201 W. Church Road
King of Prussia, PA 19406
Phone: (855) 686-7713
Email: Info@colonialteltek.com
Website: www.knobsource.com
Print Back
"The Klein Tools 69409 Line Splitter separates hot from neutral and ground wires on standard 120-Volt outlets so that current measurements can be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement. The Line Splitter has a standard measurement section and ten-times multiplier section for use with less accurate or higher ranged clamp meters. It was designed for use with Klein Tools clamp meters but will also function with many other manufacturers' clamp meters."
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A Line Splitter

UPC Code

 N/A 92644694097

UNSPSC code

 N/A 32101529

Drop Protection

 N/A 3.3 ft1 m

Weight

 N/A 0.11 kg0.24 lb

Dimensions

Overall Length

 N/A 4.67 in118.61 mm

Overall Width

 N/A 2-9/32 in57.9 mm

Overall Height

 N/A 4-43/64 in118.7 mm

Application

Application

 N/A Use with Klein® Clamp Meters

Features

Features

 N/A
  • Allows the measuring of current draw up to 15 A without splitting the load's power cord.
  • For use with all Klein® clamp meters.
  • Can be used to perform voltage checks with standard multimeter probes.
  • Provides 10X measurement mode.
  • For North American-style outlets only.
  • Do NOT use with current loads greater than 15A (which would be displayed as greater than 150A on a clamp meter using the Line Splitter 10x).
  • Do not use if Line Splitter 10X appears damaged in any way; do not use if wet, intended for indoor use only.