Colonial TelTek
Colonial TelTek
201 W. Church Road
King of Prussia, PA 19406
Phone: (855) 686-7713
Email: Info@colonialteltek.com
Website: www.knobsource.com
Print Back
The industry leading FOSC 400 family of fiber optic splice closures is now available with gel seal technology for cable terminations. This new product line will be known as the FOSC 450 gel family of fiber optic splice closures. FOSC 450 gel splice closures have the same (or expanded) splice capacity as FOSC 400 closures and feature the same reliable and easy-to-use dome-to-base clamping system. The big difference with FOSC 450 gel closures is that the cable terminations use gel sealing technology instead of heat shrink. Gel seal cable terminations automatically adjust to cable size and shape, and they require no special tools, tapes or mastics to install. It is also easy to remove cables, and gel seals are completely re-usable.
Unit of Measure

Specifications

Max. Width of Clamp (in.)

 N/A 9.25

Max. Width of Clamp (cm)

 N/A 23.4

Dome Diameter (in.)

 N/A 7.25

Dome Diameter (cm)

 N/A 18.4

Total Length (in.)

 N/A 24.0

Total Length (cm)

 N/A 60.9

No. of Ports

 N/A 2 6
Splice Capacity1 N/A 12 =B tray with two SM6 splice modules (12 splices) 24 =B tray with two SM12 splice modules (24 splices) NT =No trays

No. of Trays

 N/A 0 [NT] 01

Basket Type

 N/A B-Size Basket None

Valve for Flash Test

 N/A No Yes [Standard]

Closure Accessories

 N/A FOSC-ACC-B-Basket Slack storage basket for loose buffer tubes and ribbon FOSC-ACC-B-Tray-12 B size tray with two SM6 splice modules FOSC-ACC-B-Tray-24 B size tray with two SM12 splice modules

Features

Features

 N/A
  • FOSC 450 gel closures come in three sizes (D,B and A)and can be used for aerial, underground and buried splices.
  • Splice trays in all closures are hinged for access to any splice without disturbing other trays or circuits.
  • Inter-tray jumpers can be installed at the hinge end of trays for safely routing fibers between splice trays.
  • Closure domes can be installed and removed in less than one minute to save time and to ensure fibers are always protected.
  • All closures are backed by Tyco Electronics’ extensive network of technical field support specialists.
  • 1 -Capacity of splice tray
    12 =B tray with two SM6 splice modules (12 splices)
    24 =B tray with two SM12 splice modules (24 splices)
    NT =No trays