Print Back
93025
Unit of Measure
Items 93025
93025
25 feet Single Hook Tape Measure
928-25hv
928-25HV
25 feet High Visibility Case Tape Measure
86125
86125
25 feet Non-Magnetic Tape Measure
86216
86216
16 feet Double Hook Magnetic Tape Measure
86225
86225
25 feet Double Hook Magnetic Tape Measure
Description N/A N/A "The Klein® Tools' 25' Tape Measure with Hi-Visibility Case is easy to spot in a tool box, pouch, and on the jobsite. The bright orange case makes it easy to see and is also high-impact for added durability. It also features easy-to-see oversized numbers." N/A "Klein® Tools Tape Measures offer inventive first-rate features derived from jobsite professionals, to make jobs easier and more efficient. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and keeps water and dirt out to prevent tape blade rust and degradation. The high impact rugged, rubberized industrial design of this non-magnetic single-hook tape offers a good grip and stands up to basic demands of the jobsite." N/A "Klein® Tools Tape Measures offer inventive first-rate features derived from jobsite professionals, to make jobs easier and more efficient. A magnetic double hook has a center top portion for hanging onto conduit right side up and upside down, while a 1-1/4 inch flared hook was designed specifically to pass-through 1-3/8 inch holes drilled for 1 inch conduit. This large magnet profile attaches to steel and along EMT conduit. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and keeps water and dirt out to prevent tape blade rust and degradation. The high impact rugged rubberized industrial design offers a better grip and stands up to any task the jobsite demands." N/A "Klein® Tools Tape Measures offer inventive first-rate features derived from jobsite professionals, to make jobs easier and more efficient. A magnetic double hook has a center top portion for hanging onto conduit right side up and upside down, while a 1-1/4 inch flared hook was designed specifically to pass-through 1-3/8 inch holes drilled for 1 inch conduit. This large magnet profile attaches to steel and along EMT conduit. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and keeps water and dirt out to prevent tape blade rust and degradation. The high impact rugged rubberized industrial design offers a better grip and stands up to any task the jobsite demands."
Brand N/A Klein®
Type N/A Tape Measure N/A Impact Absorbing Case N/A Tape Measure N/A Double Sided Closed Case N/A Double Sided
UPC Code N/A 92644930256 N/A 92644860706 N/A 92644861253 N/A 92644862168 N/A 92644862250
UNSPSC code N/A 27111801
Blade Material N/A Steel N/A N/A N/A N/A
Tape Coating N/A N/A Nylon N/A Nylon N/A Nylon N/A Nylon
Lock Type N/A Button N/A N/A N/A N/A
Rewind Type N/A Automatic
Tape Material N/A N/A Steel N/A Steel N/A Steel N/A Steel
Hook Type N/A Single N/A Single N/A Single N/A Double N/A Double
Measurement Standard N/A SAE
Case Material N/A Rubber N/A Impact Absorbing Rubber N/A N/A Acrylonitrile Butadiene Styrene (ABS) N/A Acrylonitrile Butadiene Styrene (ABS)
Blade Coating N/A Nylon N/A N/A N/A N/A
Magnetic N/A No N/A No N/A No N/A Yes N/A Yes
Case Type N/A Impact Absorbing N/A N/A N/A N/A
Belt Clip N/A Yes N/A N/A Yes N/A Yes N/A Yes
Case Color N/A N/A Orange N/A N/A Orange N/A Orange
Lockable Tape N/A N/A N/A Yes N/A Yes N/A Yes
Graduations N/A N/A N/A N/A 1/16 in N/A 1/16 in
Stand-Out N/A N/A N/A Up to 9-1/2 ft N/A Up to 9-1/2 ft N/A Up to 9-1/2 ft
Overall Length N/A N/A 3-1/2 in88.9 mm N/A 3-1/2 in88.9 mm N/A 3-1/4 in82.6 mm N/A 6-1/2 in165.1 mm
Overall Width N/A N/A 1 in25.4 mm N/A 2 in50.8 mm N/A 2 in50.8 mm N/A 4-1/4 in108 mm
Blade Length N/A 25 ft7.6 m N/A N/A N/A N/A
Tape Length N/A N/A 25 ft7.6 m N/A 25 ft7.6 m N/A 16 ft4.9 m N/A 25 ft7.6 m
Overall Height N/A N/A 3-1/2 in88.9 mm N/A 3-5/16 in84.1 mm N/A 3-3/64 in77.4 mm N/A 2-1/4 in57.2 mm
Weight N/A 0.38 kg0.84 lb N/A 0.50 kg1.00 lb N/A 0.50 kg1.10 lb N/A 0.37 kg0.81 lb N/A 0.50 kg1.10 lb
Features N/A
  • "Oversized, bold blade numbers on first 11'' (279 mm) for easy reading."
  • 16'' (406 mm) stud markings and 19.2'' (488 mm) truss markings.
  • Non-magnetic single hook.
  • Rubberized lock button for comfort.
  • Impact absorbing case.
  • Nylon-coated hardened steel blade resists abrasion and wear for long life.
  • Built-in shock absorber to protect blade tip.
  • True zero feature for accurate inside and outside measuring.
  • Durable steel belt clip for convenience.
  • Multi-riveted end hook with bottom blade protector reinforces the blade tip and provides maximum pull-out strength.
  • "To avoid personal injury and prevent damage to product, do not allow the blade to retract into case at full speed."
  • Do NOT open case. Spring motor is under tension and opening may cause injury.
  • Always wear eye protection.
  • Rubber Lock Button
N/A
  • "High-visibility, high-impact orange case makes it easy to find in a tool box, pouch, and on the jobsite."
  • 16'' (406 mm) and 19.2'' (488 mm) stud-center marks.
  • Oversized numbers.
  • 3-rivet end hook.
  • True zero feature for accurate inside and outside measuring.
  • Always wear approved eye protection.
  • Never use on or near live electrical circuits.
  • "Do NOT open the case. Spring motor is under tension, and opening case may cause injury."
  • High-Visibility Case
N/A
  • Easy-to-read bold lines marked on blade every 1/8''.
  • Heavy duty nylon coating protects blade printing.
  • Retraction speed brake controls blade speed and protects fingers from touching blade.
  • Super-sized back clip holds securely to wide belts and extends into pockets.
  • Up to 9-1/2' stand-out.
  • U.S. Patent Pending.
  • Always wear eye protection.
  • Do NOT open case. Spring motor is under tension and opening may cause injury.
  • Not insulated. Do NOT use on live circuits.
  • Uncluttered, Easy to Read Bold Lines Every 1/8"
N/A
  • "Uncluttered, easy-to-read bold lines marked on blade every 1/8 inch."
  • Dual angle magnetic hooks attach to conduit and steel studs.
  • Heavy-duty nylon-coating protects blade printing.
  • Retraction speed brake controls blade speed and protects fingers from touching blade.
  • Blade printed Conduit Bending Table helps calculate offsets and saddles.
  • Super-sized back clip holds securely to wide belts and extends deep into pockets.
  • U.S. Patent Pending.
  • Always wear eye protection.
  • Do NOT open case. Spring motor is under tension and opening may cause injury.
  • Not insulated. Do NOT use on live circuits. Avoid magnetic contact with sensitive electronic or computer equipment.
N/A
  • "Uncluttered, easy-to-read bold lines marked on blade every 1/8 inch."
  • Dual angle magnetic hooks attach to conduit and steel studs.
  • Heavy-duty nylon-coating protects blade printing.
  • Retraction speed brake controls blade speed and protects fingers from touching blade.
  • Blade printed Conduit Bending Table helps calculate offsets and saddles.
  • Super-sized back clip holds securely to wide belts and extends deep into pockets.
  • U.S. Patent Pending.
  • Always wear eye protection.
  • Do NOT open case. Spring motor is under tension and opening may cause injury.
  • Not insulated. Do NOT use on live circuits. Avoid magnetic contact with sensitive electronic or computer equipment.