Colonial Teltek - No-Wrench Screw Anchors

These anchors can be installed either manually or with power driven equipment. Manual installation is accomplished by inserting a bar through the eye and screwing the anchor down. Installations with portable or vehicle mounted equipment is accomplished by means of adapters. The eye dimensions are the same as shown on the Threaded Forged-Eye Anchor Rods.

Unit of Measure

Items	TJ6524WCA No-Wrench Screw Anchor Add to Quote	TJ6526WCA No-Wrench Screw Anchor Add to Quote	TJ6528WCA No-Wrench Screw Anchor Add to Quote	TJ6530WCA No-Wrench Screw Anchor Add to Quote	TJ6550WCA No-Wrench Screw Anchor Add to Quote
Description	N/A 4" Helix, 3/4" x 54" Shaft	N/A 6" Helix, 3/4" x 66" Shaft	N/A 8" Helix, 1" x 66" Shaft	N/A 10" Helix, 1-1/4" x 8' Shaft	N/A 10" Helix, 1-1/4" x 8' Shaft
Approx. Weight Each (lb.)	N/A 8.1	N/A 10.9	N/A 19.1	N/A 30.3	N/A 41.1
Note	N/A	N/A RUS Accepted	N/A	N/A RUS Accepted	N/A
Wire Diameter (in.)	N/A
Type	N/A
ft. per Coil	N/A
Avg. Break Strength (lb.)	N/A