Request Information
"Klein® Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions."
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A Continuity Tester

UPC Code

 N/A 92644690372

UNSPSC code

 N/A 41113637

Model Compatibility

 N/A CAT IV

Display Type

 N/A Backlit Digital Liquid Crystal Diode (LCD)

Includes

 N/A Test Leads, Batteries

Batteries

 N/A 3 x AAA

Ingress Protection

 N/A IP53 (except test lead jacks)

Tests Continuity

 N/A Yes

Integral Lead Storage

 N/A Yes

Control Type

 N/A Display

Material

 N/A Thermoplastic, Electronics

Pollution Degree

 N/A 2 º

Alternating Current (AC) Voltage

 N/A 600 V

Direct Current (DC) Voltage

 N/A 600 V

Drop Protection

 N/A 9-27/32 ft3 m

Standard

 N/A CAT IV 600 V

Weight

 N/A 170 g6 oz

Dimensions

Overall Length

 N/A 6-1/16 in154.0 mm

Overall Width

 N/A 2-5/16 in58.7 mm

Overall Height

 N/A 1-41/64 in41.7 mm

Application

Application

 N/A Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly

Features

Features

 N/A
  • Automatically selects voltage or continuity; automatically powers on when any measurement is attempted.
  • CAT IV 600V modern solid-state design for safety.
  • Tests GFCI protected circuits.
  • Uses standard replaceable multimeter test leads.
  • Features built-in test lead holders on back of meter.
  • Integrated flashlight.
  • IP53 dust and water resistant.
  • "Before each use, verify tester operation by measuring a known voltage."
  • Never use the tester on a circuit with voltages that exceed the category based rating of this meter.
  • Do not use the tester or test leads if they appear to be damaged.
  • Built-in Test Lead Holder and Integrated Flashlight