Request Information
This Dual-Range Non-Contact Voltage Tester automatically detects low voltage and standard voltage. A bright green LED will tell you the tester is working and also functions as a worklight. The light flashes red and two distinct warning tones sound when either low or standard voltage is detected.
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A Dual Range Non-Contact Voltage Tester

UPC Code

 N/A 92644690020

UNSPSC code

 N/A 41113642

Weight with Batteries

 N/A 45 g1.6 oz

Includes

 N/A (2) Alkaline 1.5V AAA Batteries

Batteries

 N/A Two Alkaline 1.5V AAA (Included)

Number of Batteries

 N/A 2

Frequency [Min]

 N/A 50 Hz

Frequency [Max]

 N/A 500 Hz

Alternat Current (AC) Voltage

 N/A 12 to 1000 V

Drop Protection

 N/A 9.8 ft3 m

Standard

 N/A CAT IV 1000V

Weight

 N/A 22.7 g0.80 oz

Note

 N/A Read, understand, and follow all warnings, cautions, safety information, and instructions in the manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.

Dimensions

Overall Length

 N/A 5-1/2 in139.7 mm

Overall Width

 N/A 23/32 in18.3 mm

Overall Height

 N/A 1 in25.4 mm

Features

Features

 N/A
  • Automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application.
  • "Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires."
  • "High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace."
  • "Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems"
  • "Dual Range testing, select 12-1000V AC or 48-1000V AC."
  • Auto power-off feature conserves and extends battery life.
  • CAT IV 1000 Volt rating provides expanded operation and protection.
  • "Lightweight, durable polycarbonate plastic resin construction; convenient pocket clip".
  • Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.
  • 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second)