Request Information
"ET60 is a solid-state, low impedance, electronic voltage tester. It measures AC/DC voltages up to 600V. The ET60 does NOT require batteries; it is powered by the applied voltage. It is excellent choice for testing voltage in electrical circuits, at outlets, in light fixtures or anywhere else where AC/DC voltage testing is required."
Unit of Measure

Specifications

Brand

 N/A Klein®

Type

 N/A Solid-State, Low Impedance, Electronic Voltage Tester

UPC Code

 N/A 92644690365

UNSPSC code

 N/A 41113642

Display Type

 N/A Light Emitting Diode (LED)

Includes

 N/A Test Leads

Batteries

 N/A Not Required

Interchangeable Leads

 N/A Yes

Ingress Protection

 N/A IP54

Frequency [Min]

 N/A 45 Hz

Frequency [Max]

 N/A 66 Hz

Alternat Current (AC) Voltage

 N/A 12 to 600 V

Drop Protection

 N/A 9.8 ft3 m

Standard

 N/A CAT IV 600V

Weight

 N/A 92 g3.2 oz

Dimensions

Overall Length

 N/A 5-43/64 in144.1 mm

Overall Width

 N/A 2-11/32 in59.5 mm

Overall Height

 N/A 1-7/16 in36.5 mm

Application

Application

 N/A Test AC/DC Voltage From 12-600V

Features

Features

 N/A
  • Tests AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages.
  • Uses standard replaceable multimeter test leads for versatility.
  • CAT IV 600V modern solid-state design for safety.
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested.
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets.
  • Inherent low input impedance reduces the possibility of falsely reading ghost or stray voltages on non-energized circuits.
  • "Batteries not required, as tester is powered by the applied voltage in the circuit being tested."
  • "Before each use, verify tester operation by measuring a known voltage."
  • Never use the tester on a circuit with voltages that exceed the category based rating of this meter.
  • Do not use the tester or test leads if they appear to be damaged.
  • No Batteries Required.